100 mm x 180 mm x 60,3 mm ISB 23220 K spherical roller bearings

G:M6x1; Weight:3.05 kg; L1:65 mm; T max.:100 °C; d1:67.2 mm; C0:23.2 kN; B1:43.7 mm; A:60 mm; N:20mm; Recommended tightening torque for set screw:8 Nm;

Flinger Material:Stainless Steel; Anti-Rotation Pin:Yes; Bearing Bore Shape:Round; Max Bearing Speed:5250 rpm; Bearing Series:206 Series; End Cap Groove:Yes; Self Aligning:Self Centering; Base to Center Height:Standard; Retainer Type:Max Life Cage; Housing Coating:No Coating;

Designation of housing:PA204-; B1:43.5 mm; J:52 mm; E:13 mm; A1:22 mm; L:76 mm; A:40 mm; N:M10; H2:62 mm; H1:11 mm;

S:17 mm; Designation of housing:FCE204-; A2:28.5 mm; s1:30.5 mm; G:M6x1; Designation of bearing:EX203-11G2T04; d:17.46 mm; Weight:0.64 kg; A1:8 mm; H3:62;

D:85 mm; rs min:1.1 mm; ra max:1 mm; e:0.26; Max operating temperature, Tmax:200 °C; D1:75.6 mm; Static load, C0:106 kN; d:45 mm; Dynamic load, C:116 kN; B:23 mm;

G:R1/8"; T max.:100 °C; A2:80.1 mm; Recommended tightening torque for set screw:33.9 Nm; J:187 mm; N:23mm; Designation of bearing:UC218-56G2; C0:71.5 kN; s1:48 mm; d:88.9 mm;

T max.:100 °C; C:12.8 kN; Z:63.5 mm; A:32 mm; Recommended tightening torque for set screw:5.5 Nm; N:11mm; H2:63.7 mm; B:34 mm; H:31.8 mm; L:126.5 mm;

S:17 mm; C:12.8 kN; B1:43.5 mm; E:13 mm; Z:64 mm; B:34 mm; T max.:100 °C; N:M10; C0:6.65 kN; s1:30.5 mm;

G:M6x1; L:108 mm; Designation of housing:FL209N-; J:148 mm; C0:20.8 kN; Designation of open end cover:SCOU209-28; C:31.85 kN; Weight:1.95 kg; s1:20.6 mm; d:44.45 mm;

e:15 mm; Recommended tightening torque for set screw:3.7 Nm; H:113 mm; T max.:100 °C; J:90 mm; Designation of bearing:UC204-12G2L4; T min.:-20 °C; Z:37 mm; s1:15.5 mm; G:M6x1;

da:117 mm; Static Load Rating:63.6 kN; Mounting Hole Size:5.5 mm; Oil Holes:3 mm; Outer rings PCD:148 mm; Thread Size:M3; B:22 mm; D:165 mm; d:80 mm; Dynamic Load Rating:40.4 kN;

C0:11.2 kN; Recommended tightening torque for set screw:5.5 Nm; T min.:-40 °C; B:30 mm; G:M6x1; A1:28 mm; d:30 mm; Z:19 mm; Designation of housing:PH206N-; J:121 mm;

d:90 mm; Number of Mounting Holes:12; Static Load Rating:80.2 kN; Thread Size:M8; Mounting Hole Size:9 mm; Dynamic Load Rating:46 kN; Outer rings PCD:187 mm; da:139 mm; Mounting Hole Countersink Diameter:14 mm; D:210 mm;

Weight:2.48 kg; C0:22.9 kN; N:18mm; d:50 mm; Adapter sleeve reference:HLK2310; Designation of housing:FE210N-; A2:53.2 mm; G:R1/8"; C:33 kN; A1:13 mm;

Fatigue limit load, Cu:0.96 kN; ra max:1 mm; Max operating temperature, Tmax:110 °C; Characteristic cage frequency, FTF:0.43 Hz; Characteristic inner ring frequency, BPFI:7.42 Hz; Radial clearance class:CM; Nlim (grease):7,700 rpm; Characteristic rolling element frequency, BSF:6.88 Hz; Mass:0.39 kg;