AST NJ1044 M cylindrical roller bearings

N:12mm; d:19.05 mm; Weight:0.67 kg; L:100 mm; A:25.5 mm; T max.:100 °C; S:12.7 mm; J:78 mm; A1:6 mm; B:31 mm;

s1:30.9 mm; S:17.4 mm; C0:7.88 kN; J:104.2 mm; G:M6x1; N:11mm; H2:67.8 mm; A1:24.5 mm; B1:44.3 mm; T min.:-20 °C;

RoHS:6; Bearing I.D. d(mm):20; Days to Ship:8 Days; Bearing Part Number:6804; Type:Bearings with Housin; Shape:Flange Type; Seals:DD (Contact Rubber S; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Flange Shape:Round Type;

T min.:-40 °C; d:35 mm; s1:36.3 mm; A2:51.3 mm; T max.:100 °C; d1:51.1 mm; J:130 mm; Designation of bearing:EX207G2T04; L:90 mm; L1:82 mm;

T max.:200 °C; H:190 mm; C:35.1 kN; H3:105; A2:56.6 mm; S:19 mm; N:14mm; e:24 mm; A1:13 mm; Weight:2.12 kg;

Bearing Retained:Yes (with retaining; Shape:Flange Type; Number of Bearings:Double; Shape:Flange Type; Flange O.D. H(φ):88; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Seals:ZZ (Double Shield); Flange Shape:Square Type; Bearing Used:Deep Groove Ball Bea;

T max.:100 °C; Recommended tightening torque for set screw:3.7 Nm; L1:54 mm; S:15.9 mm; G:M6x1; C0:11.2 kN; H1:18 mm; A:48 mm; J:121 mm; T min.:-40 °C;

Number of Bearings:Double; Width T(mm):35; Type:Bearings with Housin; Volume Discount:Available; Flange Shape:Round Type; Shape:Flanged Pilot Type; Volume Discount:Available; Type:Bearings with Housin; Holder Surface Treatment:Black Oxide Coating; Housing Material:1045 Carbon Steel;

C0:7.88 kN; A5:19.5 mm; L1:225 mm; H2:41 mm; Weight:1.48 kg; A:21 mm; B:27 mm; G:R1/8"; T min.:-20 °C; S:7.5 mm;

Recommended tightening torque for set screw:8 Nm; B1:35.7 mm; G:M6x1; C:19.5 kN; S:9 mm; B:23.8 mm; C0:11.2 kN; Designation of housing:FL206-; e:18 mm; d1:44.1 mm;

Number of Raceway Ring Rows:Single Row; Rolling Element Material:Steel; Inner/Outer Ring Material:Steel; Type:Thrust Ball; Load Direction:Thrust; Rolling Element Material:Steel; Outer Ring Shape:Flat; Number of Raceway Ring Rows:Single Row; Specifications/Environment:Standard; D:320;

Z:48.7 mm; B:32 mm; Designation of closed end cover:SCC207; Dz:80 mm; e:19 mm; Recommended tightening torque for set screw:8 Nm; Designation of bearing:US207-23G2; s1:16 mm; C:25.7 kN; G:M6x1;

da min:74 mm; Nref:5,300 rpm; D:120 mm; Mass:1.51 kg; d:65 mm; Fatigue limit load, Cu:26 kN; k:3.5 mm; Static load, C0:224 kN; e:0.24; Characteristic outer ring frequency, BPF0:7.6 Hz;

Outer Ring Type:Flat; Specifications:Standard; Size Standards:Metric System; Clearance sign:C3; Number of Raceway Ring Rows:Single Row; Load Direction:Radial; Outer Ring:With Outer Ring; Internal Symbol:No; I.D.(Ø):35; Symbol of contact angle:No;

RoHS:6; Stroke:No; Accessory:With steel plate cov; Unit Body Material:Cast Iron; Grease Type:Standard Grease; Basic Load Rating, Dynamic Rating(N):62200; Unit, Type:Insert Bearing Unit; Pillow Type, Category:Standard; Diameter series symbol:Used for Light load; Rolling Element Material:Bearing Steel